freq. range (mhz) isolation (db) insertion loss (db) avg. of coupled outputs above 3 db phase unbalance (degrees) amplitude unbalance (db) f l -f u ty p. min. ty p. max. max. max. 9-11 25 20 0.4 0.7 3 1.2 a b c d e f . 770 . 800 . 385 . 400 . 370 . 400 19.56 20.32 9.78 10.16 9.40 10.16 g h j k w t . 200 . 20 . 14 . 031 g rams 5.08 5.08 3.56 0.79 5 .2 typical performance data electrical specifcations maximum ratings pin connections sum port 1 port 1 (+90) 2 port 2 (0) 5 ground 3,4,7,8 case ground 3,4,7,8 50 ohm term external 6 operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 1w max. pscq-2-10.5+ 2 way-90 50 ? 9 to 11 mhz power splitter/combiner rev. d m151107 pscq-2-10.5+ hy/td/cp/am 150930 plug-in features ? low insertion loss, 0.4 db typ. ? good high isolation, 25 db typ. ? excellent phase unbalance, 1 deg. typ. ? excellent vswr, 1.10:1 typ. ? rugged shielded case applications ? modulators ? balanced amplifers pscq-2-10.5+ total loss 2.0 2.5 3.0 3.5 4.0 4.5 5.0 9.0 9.4 9.8 10.2 10.6 11.0 frequency (mhz) total loss (db) s-1(db) s-2(db) pscq-2-10.5+ isolation 25.0 25.2 25.4 25.6 9.0 9.4 9.8 10.2 10.6 11.0 frequency (mhz) isolation (db) pscq-2-10.5+ phase unbalance 89.60 89.64 89.68 89.72 89.76 89.80 9.0 9.4 9.8 10.2 10.6 11.0 frequency (mhz) phase unbalance (deg.) electrical schematic outline drawing outline dimensions ( ) inch mm frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 9.00 3.47 2.66 0.81 25.21 89.68 1.09 1.10 1.10 9.05 3.44 2.68 0.76 25.20 89.73 1.09 1.10 1.10 9.15 3.40 2.72 0.68 25.20 89.70 1.09 1.10 1.10 9.25 3.35 2.76 0.59 25.20 89.76 1.09 1.10 1.10 9.35 3.32 2.81 0.51 25.20 89.74 1.09 1.10 1.10 9.50 3.25 2.86 0.39 25.20 89.73 1.09 1.10 1.10 9.65 3.19 2.93 0.26 25.20 89.71 1.09 1.10 1.10 9.80 3.13 2.99 0.14 25.20 89.76 1.09 1.10 1.10 10.00 3.05 3.08 0.03 25.22 89.74 1.09 1.10 1.10 10.20 2.98 3.16 0.19 25.24 89.77 1.09 1.10 1.10 10.40 2.90 3.24 0.34 25.25 89.78 1.09 1.10 1.10 10.60 2.83 3.32 0.49 25.27 89.77 1.09 1.10 1.10 10.80 2.77 3.42 0.64 25.30 89.77 1.09 1.10 1.10 10.95 2.72 3.48 0.75 25.32 89.79 1.09 1.10 1.10 11.00 2.71 3.50 0.79 25.33 89.79 1.09 1.10 1.10 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. case style: a01 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
